|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
*Customer: SPECIFICATION ITEM MODEL PART NO. Revision CHIP LED DEVICE SSC-THBTGFR421 [Contents] 1. Features 2. Absolute maximum ratings 3. Electro-optical characteristics 4. Characteristic diagram 5. Soldering profile 6. Outline dimension 7. Packing 8. Reel packing structure 9. Precaution for use 10. Label Structure Drawn by Checked by Approved by SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 SSC-THBTGFR421 Seoul Semiconductor - 8/8 - 1. Features Full-color lighting Package : 1.6x1.5x0.5mm, Flat molding 2. Absolute Maximum Ratings Parameter Power Dissipation Symbol Pd Color Red Green Blue Red Green Blue Red Green Blue -30 ~ +85 -40 ~ +100 Value 72 30 20 50 35 Unit (Ta=25) Remarks Forward Current IF IFM*1 Topr Tstg Peak Forward Current Operating Temperature Storage Temperature *1 IFM conditions: Pulse width Tw 0.1ms, Duty ratio 1/10 3. Electro-optical Characteristics Parameter Forward Voltage Reverse Current Reverse Voltage Luminous Intensity*2 Wavelength Spectral Bandwidth Viewing angle*3 Symbol VF IR VR IV Condition IF=10 VR=5V IR=10mA IF=10 IF=10 IF=10 IF=10 Color Red Green Blue Red Green Blue Red Green Blue Red Green Blue Red Green Blue Red Green Blue Min. 1.7 2.7 2.7 40 85 25 610 510 468 Typ. 2.2 3.1 3.1 0.1 0.7 0.7 65 140 40 625 525 474 20 35 25 150 150 150 Max. 2.3 3.6 3.4 10 1.6 1.6 85 170 60 640 540 480 - (Ta=25) Unit V V mcd d 2 1/2 *2 The luminous intensity IV is measured at the peak of the spatial pattern which may not be aligned with the mechanical axis of the LED package. *3 1/2 is the off-axis where the luminous intensity is 1/2 the peak intensity. [Note] All products confirm to the listed minimum and maximum specifications for electric and optical characteristics, when operated at 20mA within the maximum ratings shown above. All measurements were made under the standardized environment of SSC. (Tolerance: VF 0.1V, IV 10%, d 2nm) SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 SSC-THBTGFR421 - 8/8 - 4. Characteristic diagram Forward Current vs. Forward Voltage Luminous Intensity vs. Forward Current 100 180 160 Relative Intensity IV[%] 140 120 100 80 60 40 Forward Current IF[mA] 10 1 RED GREEN BLUE 0.1 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 20 0 0 5 10 15 20 25 30 RED GREEN BLUE 35 40 Forward Voltage VF[V] Forward Current IF[mA] Forward Current Derating Curve Radiation Diagram 40 35 30 25 20 15 10 5 0 -25 90 Forward current IF[mA] .0 Red : 0.42mA/ C o 120 60 .8 .6 .4 Blue & Green : 0.145mA/ C o 150 30 .2 75 o 0 25 50 100 .0 180 0.5 0.5 0 Ambient temperature Ta[ C] SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 SSC-THBTGFR421 - 8/8 - 5. Soldering Profile Reflow Soldering Conditions/ Profile (1) Lead Solder -Preliminary heating to be at 150max. for 2 minutes max. -Soldering heat to be at 240max. for 5 seconds max. LED Surface temperature C Operation heating 240 150 ~ Pre-heating Temperature rise: 5C/sec. Cooling: -5C/sec. 120 0 60 to 120 sec. 5sec. max (2) Lead Free Solder -Preliminary heating to be at 150max. for 2 minutes max. -Soldering heat to be at 260max. for 10 seconds max. LED Surface temperature C Operation heating 260 150 ~ 120 0 Pre-heating Temperature rise: 5C/sec. Cooling: -5C/sec. 60 to 120 sec. 10 sec. (3) Hand Soldering conditions -Not more than 3 seconds @MAX280, under Soldering iron. SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 SSC-THBTGFR421 - 8/8 - 6. Outline Dimension (0.18) Resin Green Tolerance: 0.1, Unit: 1.5 3 1.6 4 0.4 Marking 0.2 [Inner Circuit Diagram] 1.1 1.2 0.8 PCB 2 0.8 1 0.2 0.5 0.05 0.6 0.4 1 2 3 4 Anode Common Blue Red 0.2 1.8 7. Packing 0.05 0.1 4.0 1.5 +0.1 -0 0.1 1.75 1.75 2.0 0.05 0.2 0.05 0.05 3.5 4.0 0.1 0.5 0.05 1.73 0.05 (2.75) 8.0 0.2 0.7 0.05 180 +0 -3 11.4 9 0.3 2 0.2 +0.2 -0 22 13 0.2 Label 60 Tolerance: 0.2, Unit: (1) Quantity : 4000pcs/Reel (2) Cumulative Tolerance : Cumulative Tolerance/10pitches to be 0.2mm (3) Adhesion Strength of Cover Tape : Adhesion strength to be 0.1-0.7N when the cover tape is turned off from the carrier tape at 10 angle to be the carrier tape. (4) Package : P/N, Manufacturing data Code No. and quantity to be indicated on a damp proof Package. SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 SSC-THBTGFR421 - 8/8 - 2.4 0.8 8. Reel Packing Structure Reel P/N : # # # # # # # # # # # SSC-THBTGFR421 Lot N o ######### : 4000 Aluminum Vinyl Bag P/N : # # # # # # # # # # # SSC-THBTGFR421 Lot N o ######### : 4000 Outer Box *Material: Paper(SW3B(B)) a 7inch 245 c CHIP LED PART CODE Q'Y T : : 40,000 E A : S E O UL SE MIC O N D U C T O R C O ., L T D TYPE SIZE(mm) b 220 c 142 : SSC-THBTGFR421 CHIP LED b a LOT NO : DATE SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 SSC-THBTGFR421 - 8/8 - 9. Precaution for use (1) Storage In order to avoid the absorption of moisture, it is recommended to store in the dry box (or desiccator) with a desiccant . Otherwise, to store them in the following environment is recommended. Temperature : 5~30 (2) Attention after opened However LED is correspond SMD, when LED be soldered dip, interfacial separation may affect the light transmission efficiency, causing the light intensity to drop. Attention in followed. a. After opened and mounted, the soldering shall be quickly. Temperature : 5 ~ 40 Humidity : less than 30% b. Keeping of a fraction Humidity : 60%HR max. (3) In case of more than 1 week passed after opening or change color of indicator on desiccant components shall be dried 10-12hr. at 605. (4) In case of supposed the components is humid, shall be dried dip-solder just before. 100Hr at 805 or 12Hr at 1005. (5) Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temp. after soldering. (6) Quick cooling shall not be avoid. (7) Components shall not be mounted on warped direction of PCB. (8) Anti radioactive ray design is not considered for the products listed here in. (9) This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When washing is required, IPA should be used. (10) When the LEDs are illuminating, operating current should be decided after considering the ambient maximum temperature. (11) LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3 months or more after being shipped from SSC, a sealed container with a nitrogen atmosphere should be used for storage. (12) The LEDs must be soldered within seven days after opening the moisture-proof packing. (13) Repack unused products with anti-moisture packing, fold to close any opening and then store in a dry place. (14) The appearance and specifications of the product may be modified for improvement without notice. (15) Static Electricity and surge damages the Blue/Green LEDs. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be properly grounded. (16) It is recommended to use individual resistor separately when the LEDs applies in parallel circuit so that it may improve the light deviations. (17) It is recommended to examine to the full the circuit by using resistor when the LEDs applies in case of lighting seven colors. (White colour is not available with single LED.) SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 SSC-THBTGFR421 - 8/8 - 10. Label Structure P/N : ########## SSC-THBTGFR421 # Lot No CAA050331#######-## : 4000 Bin(A~R) Day Month Year SSC-QP-0401-06(REV.0) SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537 SSC-THBTGFR421 - 8/8 - |
Price & Availability of SSC-THBTGFR421 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |